PLC-BPT- 24DC/ 1IC/ACT

https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) 14 mm PLC basic terminal block for high switch-on currents with push-in connection, without relay or solidstate relay, for mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 24 V DC Key Commercial Data Packing unit 10 pc GTIN GTIN 4046356512398 Weight per Piece (excluding packing) 44.100 g Custom tariff number 85366990 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 14 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Maximum altitude ≤ 2000 m Input data Nominal input voltage UN 24 V DC Protective circuit Damping diode 12/28/2018   Page 1 / 10 https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Technical data Input data Polarity protection diode Output data Compatible components Miniature relay, REL-MR-24DC/1IC/ACT; miniature optocoupler, OPT-24DC/24DC/5, OPT-24DC/230AC/2 Connection data, input side Connection name Input side Connection method Push-in connection Stripping length 10 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² () 2x 0.5 mm² ... 1 mm² () Conductor cross section AWG 26 ... 14 Connection data, output side Connection name Output side Connection method Push-in connection Stripping length 10 mm Conductor cross section solid 0.14 mm² ... 2.5 mm² Conductor cross section flexible 0.14 mm² ... 2.5 mm² 0.2 mm² ... 2.5 mm² () 2x 0.5 mm² ... 1 mm² () Conductor cross section AWG 26 ... 14 General Note Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. The PLC-ATP separating plate should be installed for safe isolation between adjacent modules The PLC-ATP separating plate is required at the start and end of every PLC terminal strip. The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact. Color green Operating mode 100% operating factor Mounting position any Assembly instructions In rows with zero spacing Degree of protection IP20 Min. degree of protection of inst. location IP54 Standards and Regulations Connection in acc. with standard CUL 12/28/2018   Page 2 / 10 https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Technical data Standards and Regulations Standards/regulations EN 50178 EN 61810-1 Rated insulation voltage 250 V AC Rated surge voltage 6 kV Insulation Safe isolation, reinforced insulation Degree of pollution 2 Overvoltage category III Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram 13 A2 BB A1 14 Classifications eCl@ss eCl@ss 5.0 27371603 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371603 eCl@ss 8.0 27371603 eCl@ss 9.0 27371603 ETIM ETIM 2.0 EC001456 ETIM 3.0 EC001456 ETIM 4.0 EC001456 ETIM 5.0 EC001456 ETIM 6.0 EC001456 12/28/2018   Page 3 / 10 https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Classifications UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39122326 Approvals Approvals Approvals DNV GL / UL Recognized / cUL Recognized / EAC / cULus Recognized Ex Approvals Approval details DNV GL    http://exchange.dnv.com/tari/  TAE0000196-01 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705 EAC      RU CDE.A*30.B.01082 cULus Recognized       Accessories Accessories 12/28/2018   Page 4 / 10 https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Accessories Bridge Continuous plug-in bridge - FBST 500-PLC RD - 2966786 Continuous plug-in bridge, length: 500 mm, color: red     Continuous plug-in bridge - FBST 500-PLC BU - 2966692 Continuous plug-in bridge, length: 500 mm, color: blue     Continuous plug-in bridge - FBST 500-PLC GY - 2966838 Continuous plug-in bridge, length: 500 mm, color: gray     Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red     Single plug-in bridge - FBST 6-PLC BU - 2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue     12/28/2018   Page 5 / 10 https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Accessories Single plug-in bridge - FBST 6-PLC GY - 2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray     Single plug-in bridge - FBST 8-PLC GY - 2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray     Single plug-in bridge - FBST 14-PLC BK - 2967691 Single plug-in bridge, length: 14 mm, number of positions: 2, color: black     Controller board System connection - PLC-V8L/FLK14/OUT - 2299660 V8 adapter for 8 x PLC-INTERFACE (14 mm); Controller: PLC system cabling of output cards; connection 1: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals); connection 2: 1x IDC/FLK pin strip (14-position); number of channels: 8; control logic: positive switching     System connection - PLC-V8L/FLK14/OUT/M - 2304306 V8 adapter for 8 x PLC-INTERFACE (14 mm); Controller: PLC system cabling of output cards; connection 1: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals); connection 2: 1x IDC/FLK pin strip (14-position); number of channels: 8; control logic: negative switching     DIN rail 12/28/2018   Page 6 / 10 https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Accessories DIN rail, unperforated - NS 35/ 7,5 V2A UNPERF 2000MM - 0801377 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Stainless steel V2A, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     12/28/2018   Page 7 / 10 https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Accessories DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     Labeled terminal marker Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 991 ... 1000, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Partition plate 12/28/2018   Page 8 / 10 https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Accessories Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation     Power module Power terminal block - PLC-ESK GY - 2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Zack marker strip - ZB10/WH-100:UNBEDRUCKT - 5060883 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm     Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm     12/28/2018   Page 9 / 10 https://www.phoenixcontact.com/in/products/2900260 Relay base - PLC-BPT- 24DC/ 1IC/ACT - 2900260 Accessories Marker for terminal blocks - UC-TM 12 - 0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm     Marker for terminal blocks - UCT-TM 12 - 0829144 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm     Necessary add-on products Single relay - REL-MR- 24DC/1IC - 2961341 Plug-in miniature power relay, with power contact for high switch-on currents, 1 N/O contact, input voltage 24 V DC     Miniature solid-state relay - OPT-24DC/ 24DC/ 5 - 2982100 Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 3 - 33 V DC/5 A     Miniature solid-state relay - OPT-24DC/230AC/ 2 - 2982171 Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 24 V DC, output: 24 - 253 V AC/2 A     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 12/28/2018   Page 10 / 10